Roofing Maintenance Tips

The roof is a barrier between your home and the elements. It protects your family from obvious dangers like storm damage and rotting tree branches. It also helps insulate your house and prevents energy waste.


But even with the best roofing materials, it can still suffer from weather damage and natural wear and tear. It is important to do regular maintenance to catch any small problems before they grow into larger, more expensive issues. Visit to learn more.

If a roof leak occurs, the first place you should look is the flashing. If you see signs of rot or mold growing on the flashing, it’s time to replace it. Flashing seals the gaps created by things like chimneys, vent pipes and skylights. It also protects the wall of your home from moisture infiltration. If the flashing is damaged, the gap will eventually lead to a leak. A roof inspection can locate these issues before they become serious problems.

You should inspect the flashing on a regular basis, either as part of a full roof inspection or as an independent service. The best way to do this is to walk the entire roof, if it is safe to do so. You can also use binoculars or a camera. It is important to be able to see the edges of the flashing, so you can look for raised nails or screws and loose shingles.

Flashing should be inspected for corrosion, and it is also important to see if the flashing is properly installed. The building code doesn’t specify how flashing is to be installed, but it should be done in a manner that prevents moisture penetration.

Some flashing is not visible because it is under shingles or is located behind a structure like a chimney or vent pipe. When this is the case, you should inspect these areas by leaning a ladder against the structure or using binoculars.

It is also important to check the caulking on a regular basis. This is an easy task, but it is often overlooked. It is important to ensure that the caulk is in good condition and is tightly sealed to the flashing.

If you notice any gaps, you should add more caulk to these locations. It is a simple task that will keep the roof watertight and help prevent leaks. In addition to checking the flashing, you should also examine the wall and window penetrations for moisture intrusion. Too often leaks from these areas are disguised as roof leaks. It is a good idea to do these checks on a regular basis, especially after significant weather events.

Trim Trees

Arborists and roofing contractors alike recommend trimming tree branches that hang over a roof on a regular basis. This will help to prevent damage that could require a roof replacement and will also prevent the accumulation of organic debris on the roof surface. This will allow for proper runoff of precipitation and reduce the risk of pest infestations, which are exacerbated by excessive debris on a roof.

Some people prune their trees for aesthetic reasons, while others do it to prevent the spread of disease and to protect power lines. However, many people forget that it is just as important to prune the trees on their residential property. Letting the tree limbs become too long can lead to a number of issues, including structural damage to the home and the loss of natural light.

A large and swaying tree branch can cause damage to the roof shingles as well as to other parts of the house, including the windows and foundation. This damage can be even more serious during a storm, as the branches can break and fall onto the roof.

In addition, overhanging branches can poke into the outer surface of the roof and slowly strip it down to the base mat layer. This can then expose the roof to moisture, which will require extensive and expensive repairs.

It is possible to trim overhanging tree limbs yourself if the branches are not too high and you have the right equipment, such as a ladder and a climbing line. However, it is always safer to hire a professional arborist to do the job for you. They have the knowledge and the tools to safely cut the limbs without damaging the roof or causing injuries.

If you decide to do it yourself, make sure that the limbs are secure in their branches and that they are not near any people or valuable items. It is also important to use a reputable company so that you can be certain that they are cutting the limbs properly and safely. For example, they should never cut a limb too close to the trunk and should always cut at a point that is farther away from the bud of the tree.

Clean the Gutters

Clean gutters are vital for protecting the roof from water damage. If your gutters become clogged with leaves, dirt and other debris, rainwater will flow over the edge of the roof and soak into the wood sheeting. This can cause the wood to rot and even leak into your home’s structure. Gutter cleaning is a simple task that can prevent this kind of damage and should be included on your roof maintenance checklist.

It is recommended that you clean the gutters twice a year. A good time to do this is in the spring and fall when the leaves are changing colors and falling off the trees. It is also a good idea to clear the gutters after a storm.

A clogged gutter can be very problematic, especially if you live in an area that gets lots of snowstorms. When a clog occurs, melting snow and ice is unable to drain properly, and this can create an ice dam that will pull away the shingles. This is a very dangerous situation, and it is best to hire a professional to deal with this problem.

If you’re going to clean the gutters yourself, it’s a good idea to use a ladder that’s stable and sturdy. You’ll also want to make sure you have a spotter to keep an eye on your safety while you are working. Working at heights can be extremely dangerous, and a fall from a roof is very serious.

There are many ways to clean your gutters, but the best way is probably to use a leaf blower with a gutter attachment. These attachments are available for most leaf blowers and allow you to remove the debris from your gutters without having to stand on a ladder. The downside is that it can be very messy, and you’ll need to wear goggles to avoid getting debris in your eyes.

It’s a good idea to have downspouts that extend at least two feet (three is preferable) from the base of the home. This will help to ensure that the water is not funneling into puddles near the foundation of the house, which can lead to expensive water damage down the line.

Inspect the Shingles

With all the damage that can be done to your roof by wind and hail, you’ll need to inspect it for shingle damage. This can be hard to do unless you’re standing on the ground, but you can get an idea of what’s going on by taking a look at the gutters and the surrounding areas. Look for asphalt granules that have been knocked off of the shingles. This could mean that your shingles are not in good shape or that they were not installed properly.

Another area that will need to be inspected is the decking of your roof. This will include the joists and rafters. If these are sagging or rotting then it may be time to replace them. It’s important that the decking is a sturdy structure because it supports the shingles.

An inspector will also check the integrity of the flashing, which is the thin metal that lines penetrations, such as chimneys and vent pipes. They will also look for rust and cracks in these areas. It is important that these areas are sealed correctly so that precipitation doesn’t fall directly onto the chimney or penetrate the shingle.

A contractor will also look at the gable, soffit, and ridge vents to make sure that they are not blocked or have any loose fasteners. They will also check the condition of the fascia boards, which are the horizontal boards that run along the edge of your roof. They will also examine the soffit boards, which cover the underside of the roof overhangs and protect against water damage and pest infestation.

Lastly, the inspector will also look at the interior of your home for signs of leaks and moisture damage. They will check in your attic, especially if there is one, and look for wet insulation or water stains on the ceiling.

While many people have attempted to perform their own roof inspections, it’s generally not a great idea if you have any concerns or if your roof has been damaged by a storm. A professional roofing contractor can inspect your roof, assess the damage and recommend a plan for repair.


Eco-Friendly Roof Cleaning

A home’s roof can become discolored with streaks, stains, and growths. This may be due to algae or moss. Unchecked moss can cause damage to shingles and void some warranties. Many products can be used to clean a roof. Some are eco-friendly, and others have heavy-duty formulas for tough stains.

roof cleaning

Roof Cleaning MT Pleasant does not use any chemicals. Instead, it uses gentle cleansers to remove stains and kill the moss and mold that grow on a roof. It also removes all dirt and grit, leaving the roof sparkling clean and ready for its next rainstorm. The most common roof cleaning method is to spray high-strength chlorine bleach on the moss and algae. This method may have some benefits, such as its low cost and the fact that it can be done from the ground. However, it has several disadvantages. For one, chlorine has a strong chemical odor, and it can kill the surrounding plants. It can also cause oxidation to the asphalt shingles or damage metal roofs. Additionally, the dripping bleach can contaminate gutters and the lawn, killing grass and other plants around the house.

In addition to the strong chemical odor, this method can be extremely hazardous to pets and humans. The chlorine can cause eye and lung irritation. In addition, it can cause a chemical burn to people and pets that come into contact with it. This is because the solution can burn the skin and mucous membranes. The odor can also hang in the air for hours. It can also irritate the nose, throat, and respiratory system of people in the house.

The use of chemicals to clean the roof can also cause damage to the home’s siding and paint. Harsh cleaners can erode the surface of wood or vinyl siding, making asphalt shingles brittle or rust on metal roofs. The harsh cleaners can also drip down the side of the house, causing damage to the siding and killing the lawn and plants.

Many homeowners hire a professional roof cleaning company to remove the stains caused by mold, mildew, and lichens. The best way to protect the environment from these harmful chemicals is to install a downpipe diverter on the roof, preventing the chemical runoff from reaching stormwater systems and the environment. Another way to help the environment is to establish a garden or landscape drain. These will prevent the chemical runoff from damaging the lawn and landscaping.

Although bleach is a popular cleaning solution, it is unsuitable for all roof stain removals. It is a harsh chemical that can damage the roof’s surface and cause long-term deterioration. This can lead to leaks and premature aging of the shingles.

The best way to remove these stains is to use a professional roof cleaner with specific stain-removal chemicals. These cleaners can penetrate deeper and remove the embedded growth of moss, lichen, and algae. They also offer better long-term results than bleach.

Many homeowners must know they can safely clean their roofs with household bleach. However, this is not true, and it can be dangerous for the health of the roof and surrounding property. Bleach in roof cleaning can damage the shingles and tiles, leading to leaks and premature breakdown. It can also contaminate soil and harm plants. Bleach runoff can also pollute water sources, endangering animals and disrupting ecosystems. It is therefore important to debunk this myth and educate homeowners about safer cleaning methods.

Bleach is corrosive and unpleasant, so always wear protective gloves and goggles when working on your roof. You should also avoid working on a windy day, as the chlorine can be carried off by the wind and irritate your eyes and skin. In addition, a bleach solution can erode asphalt shingles and weaken the roof’s structure.

When using a bleach-based solution, you should first wet the foundation plantings down. This will prevent them from the runoff containing sodium hypochlorite. You should then apply the cleaning mixture and let it soak on the roof for 15 to 20 minutes. After that, rinse it thoroughly with a garden hose.

If you are trying to remove a severe buildup of lichen or moss, try using a stronger dilution of bleach. However, you should be careful not to exceed the 50:50 ratio of bleach and water because if the concentration is too high, it may discolor or even dissolve the shingles. This is why it is recommended to use a professional bleach-based roof cleaning product, such as Gloeocapsa magma, rather than mixing your formula.

Despite the claims of many roof cleaning companies, high-pressure cleaning for a roof is not an effective or safe practice. It can cause severe damage to the surface of your roof and even dislodge tiles. It also strips paint from brick and stucco, which can lead to water leaks. Moreover, it can erode the protective layer of the tile, causing it to become porous and susceptible to future damage. High-pressure washing can also be dangerous for humans, as it can damage the skin and eyes. Therefore, it is best to hire a professional to carry out the job.

Before carrying out any high-pressure washing operation on a roof, it is important to prepare the area for spraying. This includes clearing the area of any furniture, portable braais, and cars. It is also a good idea to take note of the wind direction. These factors can affect the spraying process and may cause damage to your property.

In addition, it is essential to ensure all the power outlets are switched off before starting the work. This is because high-pressure water can cause damage to piping and electrical wiring. Additionally, it can cause damage to the gutters and roof underlayment. Sometimes, it can even rip off the shingles and force water leaks.

The ejected water from a pressure washer can also damage the surface of your roof and make it look very uninteresting. In addition, it can cause moss, mildew, and algae to grow. Therefore, it is necessary to remove these substances from the roof before they grow. It is also a good idea to use a biocide to inhibit the growth of these substances on your roof.

In addition to removing these substances, it is important to clean your roof regularly. Most roofs are subjected to constant assault from the elements and must be cleaned periodically. However, using a high-pressure water washer can damage your roof and cause leaks. In addition, it can also rip off shingles and strip the protective powder coating of the roof.

A well-maintained roof is an essential part of your home’s structural integrity and aesthetic. Regular roof cleaning can prevent damage caused by the sun, rain, wind, and debris. However, not all roof cleaning practices are created equal. High-pressure washing may damage the surface of your roof, but low-pressure soft wash cleaning is safe for all types of roofing materials.

When a pressure washer is used to scrub a roof, it uses water that can reach up to 2800 PSI (pounds per square inch). This can break tile or shingle tiles, cause cracks in the chimney stack bricks, and erode the concrete surfaces of walls and driveways. Low-pressure soft washing, on the other hand, uses a gentle nozzle that can remove dirt and stains without damaging your property.

Low-pressure soft wash involves using a specialized roof cleaner that contains surfactants and other cleaning mechanisms. These chemicals work together to remove fungus, mold, mildew, and other contaminants. This process is environmentally friendly and doesn’t use abrasive detergents or bleach.

It is important to choose a roof cleaning company that complies with your local environmental regulations. It is illegal for contractors to dump dirty water down gutters and into streams, dams, rivers, and creeks, endangering wildlife and contaminating the surrounding environment. It is also recommended that companies have a system to recycle all grey water from the roof washing process and use it back on gardens, lawns, and around plants.

In addition to reducing the risk of pollution, low-pressure cleaning will extend the life of your roof by removing black streaks. This is important, as the spores that breed damaging fungus on your roof will eventually clog shingles and gutters. If left unattended, this can lead to roof leaks and the need for a costly replacement.

Another benefit of low-pressure soft washing is that it does not damage granules, which can lead to expensive repair bills in the future. The low-pressure rinsing is also safer for people with allergies and sensitivity to harsh chemicals. In addition, it is environmentally friendly and does not leave behind any traces of chlorine or sodium hypochlorite on the surface of the property.